Free SHIPPING on everything

  Home
  FTA Receivers
  8psk Modules
  Hard Drives
  Networking
  Dishes
  LNBs
  Switches
  Motors
  Remotes
  Data Cables
  RG6 Cables
  LNB Holders
  UHF Kits
  Card Readers
  Signal Finders
  Accessories
  Linkbox


 
  Shipping
  Contact Us
  RA Request
  Return Policy
  Warranty
  Channel List
  What Is Free To Air?

 


Motorize Your Antenna

with this SG-2100 DisEqc 1.2 H-H Motor

USA

price: $79.99 Each
6 or more units $65.00 each

Puerto Rico

price: $89.99 Each
6 or more units $75.00 each

SG-2100 DisEqc 1.2 H-H Motor

new generation of professional motor with DiSEqC 1.2 compatible positioner is a powerful motor designed for rotating a satellite dish. Your satellite receiver has full automatic control using the DiSEqC 1.2, DiSEqC 1.3 and "Go To X" commands to operate this motor. Once the satellite positions have been programmed in the system, the motor returns the dish to exactly the correct location when you switch channels.

 
FEATURES:
  • Fits all popular dish with 42mm tube, including Winegard
  • Special Design for any Receiver with DiSEqC 1.2
  •  Only One Coaxial Cable Control
  •  Go To X Function
  •  High Efficiency
  •  Compact Structure
  •  Ultra Low Noise
  •  Adjustable Hardware Limits
  •  Easy Installation with LED Indicator
  •  Manual EAST / WEST button
  •  For Dish up to 1.2M
Specification:
Model SG2100
Antenna Diameter 1.2M Max.
Azimuth Angle 70¢ªEAST ~ 70¢ªWEST ( 140¢ª ) Adjustable
Elevation Angle 25¢ª~75¢ª
Input / Output Voltage 13 / 18 VDC
Power Consumption 50 mA ( Standby mode ) 
200 mA ( Normal)
350 mA ( Max.)
Rotation Speed 1.9¢ª / sec ( at 13V) ; 2.5 ¢ª/ sec ( at 18V)
Satellite Positions 60
Connector F Type
Command Protocol DiSEqC 1.2
Resynchronize Function YES
Goto Position 0 Function YES
Goto X Function YES
Positioning Sensor High Resolution Hall Effect Sensor
EAST / WEST Limit Adjustable Hardware and Programmable Software
Manual Button EAST / WEST
Indicating LED YES
color status indication
Green On Power On; Standby Mode
Orange Blink Receiving DiSEqC 1.2 Commands/ Reset Mode
Orange On Error Message: Over Current / Hardware Limit
Tube size for antenna 55x160mm
Stand size 35~65mm

 

 Shipping - Contact Us - Return Policy - Warranty - RA Request