 |
CIRCULAR /
LINEAR
DUAL
LNB
Designed to receive 119 & 118.8 at the same
time. with Dual output allows you to use 2 receivers at the same time
and recieve all the channels from both 119 and 118.8 at the same time.
|
|
 |
Invacom QPH-031 Circular &
Linear Quad Polar LNB |
|
 |
KU Linear Single LNB
10750
Standard Ku Band Digital Ready Dual LNB
for Satellite Systems Suitable for existing Analog and Digital systems.
Low noise temperature. Economical. Easy to install. Lightweight |
|
 |
Dual KU Linear LNB 10750
Standard Ku Band Digital Ready Dual LNB
for Satellite Systems Suitable for existing Analog and Digital systems.
Low noise temperature. Economical. Easy to install. Lightweight |
|
 |
DirecTV DSS Dual LNBF
11250
2-Outputs. Use it to connect multiple
receivers to one dish. Use it for one orbital location. It is
appropriate for an 18” (or "DISH 300”) dish. It can be used alone with
DSS installations. Circular type |
|
 |
Dual
Legacy LNB
Use it for one orbital location. Circular
type. A DISH Pro Dual LNBF looks at one orbital location. It has two
output ports to directly connect to two single-tuner DISH Pro receivers,
or one dual-tuner DISH Pro receiver. It can also connect to DISH Pro
DP21 or DP34 switches, if needed. |
|
 |
DishPro Dual
LNBF:
Use it for one orbital location.
Circular type. A DISH Pro Dual LNBF looks at
one orbital location. It has two output ports to directly connect to two
single-tuner DISH Pro receivers, or one dual-tuner DISH Pro receiver. It
can also connect to DISH Pro DP21 or DP34 switches, if needed |
|
 |
Dish Network DishPro Twin LNBF
Use it to look at the 110 and 119 orbital
locations, using a DISH 500. it can directly connect to two receivers.
This LNBF can connect to a DishPro DP34 switch, if more receivers, or
additional orbital locations, are required in the installation. Circular
type. |
|
 |
Dish
Network DishPro PLUS LNBF
Use it to look at the 110 and
119 orbital locations, it allows one coax cable to carry the satellite
signal requirements for two receivers or one dual tuner satellite
receiver (special DPPlus Separator is used to split the signal).
Circular type. |
|
 |
Dish
Network DishPro Quad LNBF
Use it to look at the 110 and 119 orbital
locations, using a DISH 500. it can directly connect to four receivers.
This LNBF can connect to a DishPro DP34 switch, if more receivers, or
additional orbital locations, are required in the installation. Circular
type. |
|
 |
Dish
Network legacy Quad LNBF
Use it to look at the 110 and 119 orbital
locations, using a DISH 500. it can directly connect to Four receivers. |
|
